13
Post-Installation Adjustment
N
Once your display is mounted on the wall bracket, you can fine-tune the horizontal level, tilt, pivot, and depth from the wall.
Horizontal Level
Loosen the four screws with the included crescent wrench as shown,
and adjust the horizontal level +3° to -3°. Use the bubble level to
make sure your display is level, and then tighten the screws until
secure.
Tilt Angle
Loosen the ratchet handle, and tilt the display up or down +5° to -15°
to fine-tune the viewing angle. Tighten the handle and screws as
shown until secure.
+5°
-15°
+3°
-3°