CLAIRMONT CABINET
ASSEMBLY INSTRUCTION
- If the floor is uneven adjust the levelers located at the underside of the Feet, to do this lift Up
the side that need to be elevated to provide access to the levelers, turn the leveler until
adequate contact with the floor.
Attach 2 Brackets (III) horizontally to the top corners of the Unit using the Small Screws (I).
Screw the remaining Brackets (III) into the wall vertically 1 inch below the previously installed brackets
using the Large Screws (II). The Large Screws (II) should be screwed into a stud in the wall. Align the
brackets vertically and string in the Retention Belt (IV). Confirm Strap is securely laced and locked.
Page 5 of 5
STEP 7
STEP 8
