__
CLAIRMONT CABINET
ASSEMBLY INSTRUCTION
-
Carefully place the Hutch above the Base, aligning the holes for the bolts on hutch cabinet to
the insert nut of the base.
-
Insert the Allen Bolt through the lock washer and flat washer and into the insert nut of the base
through the hole of the Hutch then lock with the Allen key.
-
Determine the desired height for the shelves, insert the shelf supports (A) into the pre drilled
holes located in the hutch cabinet. Carefully insert the shelves as shown and gently rest the
shelves onto the angular shelf support and screw using Philip Screw driver (Not Included).
Page 3 of 5
STEP 3
F
C
D
E
Back
STEP 4
