Gabarron IDP Series, Инструкция по установке и руководство пользователя

Страница: 6 / 16

6
PART DESCRIPTION
1 Heating Element Assembly
2 Knob
3 Body
4 Display
5 Pull Switch
6 Tube Cover
7 Upper Post Assembly
8 3 -M5 X 6 Screw
9 Middle Post
10 3-M5 X 6 Screw
11 Lower Post Assembly
12 Clamp
13 Power Cord
14 Base Cover
15 4-M6 X 30 Screw
16 Base Assembly
1. IMPORTANT INFORMATION

The warranty of the heater will not cover any damage caused
by non-observance of any of these instructions.

The instructions should be retained for future reference. This
guide must be kept and given to any new owner.

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children must not play with the appliance. Cleaning and user
maintenance must not be made by children without
supervision.

Children aged from 3 years and less than 8 years shall only
switch on/off the appliance provided that it has been placed or
installed in its intended normal operating position and they
have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall
not plug in, regulate and clean the appliance or perform user
maintenance.

Children of less than 3 years should be kept away unless
continuously supervised. Please check that the voltage in the
rating label fits the power supply.

Please check that the voltage in the rating label fits the power
supply.

The use of these heaters is forbidden in any area where there is
a presence of gases, explosives or inflammable objects.

Do not use this heater to dry clothes.

Do not put objects as clothes, fabrics or any combustible
materials in contact with the heater.

Do not cover this heater at any time.

Neither the connecting cable nor any other object must come
into contact with the heater.

This heater should be switched off at the isolating switch
before any repair work is carried out.

The installation must be carried out in accordance with the
current electrical regulations.

The heater should not be installed just below an electrical socket-outlet or dripping clothes.

The heater is to be installed so that switches and other controls cannot be touched by a person in the bath
or shower.

The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation
of at least 3 mm.