9
-
Use original spare parts and accessories only.
-
Do not subject the product to strong impacts, serious
damages may result.
Do not use near or under flammable materials (like
curtains), heat, cold spots and steam.
GENERAL INFORMATION
WARNING: never use the unit for any reason
inside the bath or in the shower. If it should fall
into the water does not pick it up and
immediately disconnect the power plug. Avoid any
splashes of water from getting inside of it. If this
happens, the hair clipper must be checked by qualified
personnel before operating it again.
-
Do not immerse the appliance in water or other liquids.
-
Use extreme caution when using: do not use in a state of
sleepiness and perform delicate movements.
-
Do not use on wigs or irritated skin.
-
Do not use the clipper for more than 10 minutes
continuously and allow to completely cool down for at
least 5 minutes.
-
Power off the device while changing attachment.
-
Clean and lubricate the clipper regularly to ensure better
performance and longer life.
-
Never leave the appliance unattended while it is running.
-
Do not wrap the power cord around the unit during use.
DESCRIPTION G30037
1.
Cutting blade
2.
Blade lever
3.
On-off button
4.
Spacer combs
5.
Hair comb
6.
Scissors
7.
Lubricating oil
8.
Small brush
OPERATING
Turn the power switch (3) to "0" and insert the power plug into the electrical outlet. Install one of the
available combs. The choice of the comb depends on the length of hair that you want to achieve.
Comb 4A:
3mm
Comb 4B:
6mm
Comb 4C:
9mm
Comb 4D:
12mm
To insert a comb, align the cutting blade and push until it snaps in position.
