G21 RAPID, Руководство пользователя

Страница: 6 / 40

Instalation
Wire the unit.
1. Embed the switch box in the installation location (1 switchbox no cover) and wire the power
cord (with the green and yellow combined is ground line).
• If no switchbox is used, the power cord will be pushed out, and prevent the unit from being
installed firmly against the wall.
2. Attach the installation panel to the wall using the 4 installation screws.
• If the wall is concrete, use commercially available metal screw plugs (curl plugs).
• If the wall is not concrete, reinforce it before installation.
3. Remove the drain tank.
• Use one hand to draw the lock and use the both to draw the drain tank.
4. Hang the hand dryer on the installation pannel.
5. Fasten the hand dryer.
• Take out the filter box, push the hand dryer down and fasten the safety screw as show in the
picture.
6. Attach the draink tank.
• Make sure the air filter is all the way in.
1 2
3 4
5 6