G21 Inovation, Руководство пользователя

Страница: 9 / 52

Fault phenomenon Reason analysis Trouble removal
The product is not
working The power unplugged. Plug the power cord into the ground
socket.
Loose internal wires. Contact G21 Authorized Service.
Fan does not rotate The machine is not
connected. Start working after plugging into the
power plug.
Motor damage or short circuit
of other components. Contact G21 Authorized Service.
Food materials not
fully fried Placed too many food
materials on the grid. If there are too many food materials,
put them on the grid in batches.
The set temperature is too
low. Set the temperature control knob to
the desired temperature.
Baking time is too short. Extend cooking time.
Food materials not
fully steamed Placed too many food
materials on the grid. If there are too many food materials,
put them on the grid in batches.
Steaming time is too short. Extend cooking time.
The fried food
ingredients are not
crispy Traditional fried ingredients
are not used. Suitable fried snacks can be used.
For non-oil food materials, a layer of
oil can be brushed on the surface of
the food.
White smoke comes
out Baking greasy food materials. It is a normal phenomenon that there
will be a lot of smoke leakage when
cooking greasy food.
There is still a residue of
grease in the fryer from the
last baking. Be sure to clean the fryer after each
baking.
Steam escaped from
the outside of the
machine The head of the machine is
not properly covered. Cover the machine head in place.
Seal failure. The lid seal is inserted upside down,
remove it and insert it correctly.
Troubleshooting
Troubleshooting
Fault phenomenon Reason analysis Trouble removal
“E01” The cavity thermostat is open. Contact G21 Authorized Service.
“E02” The cavity temperature
sensor short-circuited. Contact G21 Authorized Service.
“E03” The boiler temperature sensor
is open. Contact G21 Authorized Service.
“E04” The boiler temperature sensor
has short-circuited. Contact G21 Authorized Service.
“E05” Abnormal power panel zero-
crossing module. Contact G21 Authorized Service.