Handling and unpacking
Before starting the installation of this fireplace, please read the following:
1. The installation should be carried out by two adults to avoid injury or damage. If for any reason
it is considered too heavy, please obtain assistance.
2. When lifting the fireplace, always keep your back straight. Bend your legs and not your back.
Avoid twisting at the waist. It is better to reposition your feet.
3. Always grip the heater with the palm of the hand. Do not use the tips of fingers for support.
4. Unpack the package and lift the product gently out of the box, put it on a flat surface with the
front panel facing up.
Safety Warnings
1. Do not connect this heater to a programmer, timer, separate remote control system or any
other device that switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
3. In order to avoid a hazard due to inadvertent resetting of the themal cut-out, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
4. Do not use this heater in the immediate surroundings of a bath, shower or swimming pool.
5. If the glass becomes damaged, do not use the heater in order to avoid a injury.
6. Always make sure the electrical socket is accessible and located adjacent to but not above
the heater.
7. This heater must be mounted to the wall.
Installation tips
1. This heater must be fitted onto a flat wall. Ideally, install the heater directly to a brick wall,
masonry surface or the internal wooden frame of plasterboard wall. If the wooden frame behind
the plasterboard is not accessible use a minimum of four heavy-duty anchors that are suitable for
the weight of the heater.
2. We do not recommend that the heater be fitted to a wall covered in blown vinyl wallpaper,
polystyrene tiles, etc.
3. It is important that the heater be never installed under a shelf or flammable materials such as
curtains.
4. If the heater is to be mounted on to a plasterboard wall, make sure the wall is strong and stable
enough to hold the weight of the appliance. The vapor control barrier must not be damaged, and
the structural members of the house must not be damaged. We recommend minimum 12 mm thick
plasterboard.
5. Before drilling into walls, always check that there are no hidden wires, pipes, etc. Consult a
qualified person if you are not sure.
Locating your fireplace
The fireplace must not be used until it is securely fastened to the wall. When choosing a location
for your electric fireplace, ensure that the general instructions are followed. For best results, install
the electric fireplace away from direct sunlight and dust.
