Before first use:
• All parts of the blender are to be thoroughly cleaned before being used for the first time.
• Take out the required length of cable from the cable tidy on the base of the blender and connect
the device to the mains supply.
Assembling the blender jar:
1. Put the rubber sealing ring on the inner edge of the blade unit.
2. Put the blade unit with sealing ring into the cup base.
3. Mount the jar onto the cup base unit and tune the cup base unit, and turn clockwise until jar
locks into place.
4. Mount the measure cup onto the jar cover.
5. Secure the lid onto jar and press down.
Inserting the jar:
1. Make sure that the blender is switched off (Switch to the ‘0FF’ setting).
2. Place the jar assembly on to the motor base unit it is fixed securely engaged.
Positioning
• Do not place on or near a hot gas or electric burner, or in a heated oven.
Usage
1. Place the foodstuff you wish to process into the jar.
2. Put the lid on the jar and close securely. Place the measuring cap into the hole in the lid and
turn clockwise to lock.
3. Mount the glass cup onto the cup base unit and tune the cup base unit, and tune the cup base
unit in clockwise direction unit it is fixed.
4. Switch on the motor base:
Switch setting
Use
Smoothie
Fruit and yogurt or fruit and milk based drinks;Fruit or vegetable drinks
Speed setting:
MIN – MAX
For more solid consistency – for mixing liquids and solid foodstuffs
Ice-Crush
For ice crushing
OFF
Stop
Auto-clean
For ice crushing & short, powerful impulse movements
Useful tips
• To achieve the best results when pureeing solid ingredients, place small portions into the glass
jar one by one instead of placing a large quantity all at once.
• If you are processing carrots or other solid ingredients cut them into small pieces (1-1.5 cm)
first. The max carrots quantity no more than 720 g. Then add water total weight must be less than
1800 g.
• When mixing solid ingredients start off first with a small amount of liquid. Gradually add more
and more liquid through the opening in the lid.
• Always place your hand on top of the blender when you are operating the device.
• For stirring solid or very thick liquid ingredients we recommend that you push the lid down
repeatedly to prevent the blades from becoming stuck.
