PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
20
Select the movement axis on the system toolbar.
Select split mark.
Select the direction of the extension axis.
(1)Place the rotation axis as shown in Figure (1), Please select the extension axis direction: Y-axis
(2)Place the rotation axis as shown in Figure (2), Please select the extension axis direction: X-axis
Click on the parameters to pop up a page.
Set reversal
(1)Take the direction of Y-axis expansion as an example, Check reversal
(2)Take the direction of X-axis expansion as an example, Uncheck reversal
Select mode: Roller.
Click OK to confirm the completion of the settings.
Red (F1): Mark the center point of the pattern to be marked, but do not emit laser
light. It is used to indicate the processing area and facilitate the user to locate the work-
piece. This function is used for marking machines with red indicator light. Press F1 on
the keyboard to execute this command.
Mark (F2): Start processing. Press F2 on the keyboard to run this command.
3
4
6
7
5
8
9