17
02.2012 | G25621 | Printed in Germany
9 Operating parameters
•
Rated voltage
24 V DC, 2 Vpp (min. 19.1, max. 36.4 V DC)
•
Cut-off current
0.8 up to 2.5 A (depending upon drive type)
•
Travel thrust (SHEV)
600 up to 1600 N (depending upon drive type)
•
Travel length
100 up to 1000 mm + 7.5 %
•
Speed tolerance at synchronous operation approx. ± 5 mm
•
Lifting speed
at nominal thrust and 24 V DC
depending upon drive type
•
Protection class
IP65
•
Duty ratio
S60, S100
= 20 %
S80, S160
= 30 %
•
Synchronizing with RPM-regulator
yes
•
Ambient temperature range
- 5°C up to +75°C (German environment class I)
•
Triggering temperature for fire detectors < +68°C
•
Load method
opening against nominal load
closing with backing by nominal load
•
Blockade control
all 2 minutes for EMERGENCY OPEN
•
Overall length
S60, S100:
256 mm + travel
S80, S160:
302 mm + travel
S80 Synchro, S160 Synchro: 342 mm + travel
The running direction of the drive is altered by pole reversal effected through the
RWA control centre. However, if the drive is blocked in running direction, the internal
electronics/synchronising control of the drive must reverse poles for 2 seconds before
drive can start running again in the same direction.
Total life-span
Automatic operation (using natural climatic and ventilation control) presupposes a total life-span
of 10.000 ventilation cycles.
Article numbers
Solo
Synchro
S60, 24 V
9-39685-10-0-1
9-39685-15-0-1
9-39685-20-0-1
9-39685-25-0-1
--
--
S80, 24 V
9-42898-30-0-1
9-42898-50-0-1
9-42898-78-0-1
9-42898-01-0-1
S80 Synchro, 24 V
K-17584-30-0-1
K-17584-50-0-1
K-17584-75-0-1
K-17584-01-0-1
S100, 24 V
K-17586-10-0-1
K-17586-20-0-1
K-17586-30-0-1
--
--
S160, 24 V
9-39075-30-0-1
9-39075-50-0-1
9-39075-75-0-1
9-39075-01-0-1
S160 Synchro, 24 V K-18156-30-0-1
K-18156-50-0-1
K-18156-75-0-1
K-18156-01-0-1
