4.The plastic door profiles
In order to have better access to your plants both top doors are removable.
Place the four plastic U profiles inside the lips of the aluminium profile where te doors slide through. Two in
every profile. The plastic profiles should be placed on top of each other. The doors will slide through this profile.
(see picture 6). The doors can now be simply removed by lifting them and pulling them towards you.
picture 5
Frequently asked questions (F.A.Q.'s)
How much will my electricity-bill go up?
For a G-kit Bench model 150 W HPS:
When the lights are on for an average of 14/hours /day: approx.. €15,-/ month
For a G-kit Bench model Hanspanel 100W:
When the lights are on for an average of 14/hours /day: approx.. €9,-/ month
Won't the cabinets get to warm?
Normally it gets 5 to 6 degrees warmer inside the cabinet than outside.
It's best to have it in a room where you can leave a window open.
If you have more than one G-Kit in a room make sure that the light of one switches on when the light of the
other switches off (the lights are on 12 hours a day).
The humidity is too low, what to do?
Especially in the beginning it is important the plant get enough water. To spray them with water in the first two
weeks is the best.
Is it possible to put a G-kit in a barn or garage?
No problem, make sure there is enough fresh air and keep it warm in the winter.
Do I get warranty?
There's a one year warranty on all electrical equipment except for the light-bulb and filter. New parts shall be
send to you after the broken parts have been received at the distribution center.
