G-Tek LM-U PRO Series, Руководство по эксплуатации

Страница: 14 / 21

Page
13
9. Multiplier: Multiplier is a function given for the user flexibility. If the user wants to
observe the output in the range other than the actual output range, multiplier value
should be set. The value of multiplier is 1.0 by default.
10. Store Interval : It is the interval between two successive logging of data. It can be set
between 5 seconds(minimum) to 18 hours(maximum).
11. No. of Readings: This shows no. of data that will be recorded for the given batch
configuration. This number is calculated based on Batch start, stop time and store
interval. Maximum no. of readings is 32000.
12. Current Date and Time: It shows current date and time of the data logger. Click on the
“ clock ” button to sync the current date and time of the device with PC time as per
selected time zone.
13. Start Time: It is the time at which Batch will start in the device. User can preset the batch
start time by selecting the date and time as per required batch start delay. The first data
is stored at the batch start time.
14. Stop Time: It is the time at which the data logging will be stopped in the device. User can
set the stop time, if required otherwise it will be calculated based on the start time and
store interval as per maximum number of readings.
15. Display Options:
a) Display Auto Off (default) - This option is normally selected to save battery life of the
data logger
b) Display Permanent On - This option will reduce the battery life of the data logger