9
switch to the gateway’s ID number; or if your headset does not support such switch and
has been paired with the Gateway only
,
press and release the headset’s talk button once
to ascertain that the Gateway goes off hook. LED indicator on the Gateway should light
steady blue. Skip to 3.
2. If your headset does not support the switch function in 1, and you need your headset
to be paired with more than one device (e.g. the gateway and your mobile phone),
please pair the Gateway lastly
.
press and release the headset’s talk button once to
ascertain that the Gateway goes off hook. LED indicator on the Gateway should light
steady blue. Skip to 3.
3. Lift the handset of phone, upon hearing a dial tone from the headset, you should key in the
numbers that you want to dial using the keypad on your phone, then, wait for the ringing
tone.
4.
When you are done with your conversation, press and then release the talk/end button on
the headset once to terminate the call. The Gateway would then return to idle mode.
Remark : You can also proceed 3 and then 1 to make phone call. That is to usthe dialing pad on the
landline phone to dial the numbers first then press the Talk Button on the Bluetooth headset,
the landline phone will hand over the ring tone or voice if getting through. Hang up the
handset and start to talk or wait from the Bluetooth headset.
