G-Tech GL-6000L Series, Руководство по обслуживанию

Страница: 11 / 36

11
3 Test Mode
3.1 How to Enter Test Mode
Turn the power on while pressing " ZERO " Key to enter Test Mode with “ TEST ” being
displayed on the display.
3.2 Description of Test Mode
4 Calibration Mode
4.1 How to Enter Calibration Mode
Turn the power on and press "CAL" Key or “ZERO + UNIT + PRINT” Keys together until
show “CAL” on the display to enter the Calibration Mode.
4.2 Description of Calibration Mode
4.2.1 Maximum Weight Setting (select model)
: It allows to select the maximum weight. Press “ PRINT ” Key while “ CAL ” is shown on the
display to display the current maximum weight.
Use below Keys to change the maximum weight.
- UNIT Key: Use to change the maximum weight.
- PRINT Key: Use to save a newly set maximum weight and return to the previous page.
Test Type Description
A/D Test Don’t press any Key to show the current A/D value on the display.
Communication
Test
Press " TARE " Key to show “Serial test ok” on the display via serial
communication.
Backlight Test
Press " UNIT " Key to change backlight brightness and show the value
of brightness levels.
Count Value Test
Press " PRINT " Key to show count value on the display. Press “ ZERO ” Key while
the count value is displayed to adjust the count value.