G-Tec AP160LCD, Руководство пользователя

Страница: 4 / 67

1
1. Safety and EMC instructions
Please read carefully the following user manual and the
safety instructions before installing the unit or using the
unit!
1.1 Installation
★
Condensation may occur if the UPS is moved directly from a cold
to a warm environment. The UPS must be absolutely dry before
being installed. Please allow an acclimatization time of at least
two hours.
★
Do not install the UPS near water or in damp environment.
★
Do not install the UPS where it would be exposed to direct
sunlight or near heat.
★
Do not block ventilation openings in the UPS’s housing.
★
Do not connect appliances or items of equipment which would
overload the UPS (e.g. laser printers, etc) to the UPS output.
★
Place cables in such a way that no one can step on or trip over
them.
★
Socket-outlets and socket of batteries are earthed by the input
power cord, please insert the power cord into mains socket
before using of UPS.
★
Connect the UPS only to an earthed shockproof socket outlet.
★
The building wiring socket outlet (shockproof socket outlet) must
be easily accessible to close to the UPS.
★
This is operator installable.
★
Assure to connect with the earth reliably.
★
With the installation of the equipment, the sum of the leakage
current of the UPS and the connected load does not exceed
3.5mA.