Getting Start:
TX LED Indicator Status
Solid Blink
Solid Blink
Signal Transmitting
Slow blink
Rapid blink
slow blink
Rx (Red)
Tx (Green)
Slow blink
Wireless connected
Rapid blink with beep
Pairing mode
slow blink
Power On
LED Status
Event
1.
Insert 2 AAA batteries to headset. Please make sure
the battery directions correct.
2.
Connect the USB transmitter on your PC/ laptop,
and press the power button 3 sec on headset to
activate the headset.
3.
If it is your first time using this wireless headset,
please operate the pairing process as following:
4.
You can start enjoying the wireless headset
now!!
a. Simultaneously press the pairing key on TX\RX
as rapid LED blink.
b. The LED will be slow blink while the pairing
succeeded.
1
2
Set up:
Control:
Rotate to Mute:
The microphone automatically mute when you rotate it up.
Note:
• You can directly use the headset without pairing after the first pairing operation.
• 10-minute auto-off when wireless adapter not detected
Notice: The headset has a wireless range of up to 15m. However, wireless performance
may be affected by walls, metal items, and other wireless devices (e.g. WLAN…etc).
When the headset is moved to the limit of wireless range, audio may become distorted
and eventually cut out. Moving closer to the wireless adapter will restore clear audio.
