Page 8
User configurable parameters can be programmed using the 4-position DIP switch, the on-board push-button next
to the DIP switch, and on-board LED.
Enter Programming Mode
Press the Program button. The LED will begin flashing the option code of the selected parameter.
Select Parameter
Select the parameter you wish to view or program using the DIP switch. (the white square indicates position of the
switch; e.g. for parameter 0, all switches are in the down or off position.
View Current Option Code
The LED will repeatedly flash the option code for the currently selected parameter; e.g. two flashes followed by a
pause indicates option 2.
Change the Option Code
Momentarily press the push-button during the pause to advance the option to the next higher number, until you
get the desired number of flashes.
Save the Option Code
During the pause between code flashes, press and hold down the Program button for about 4 seconds until the
LED starts flashing rapidly, which indicates the save is complete.
Select the next Parameter
Repeat the above as needed to view or make changes to other parameters using the DIP switch to select.
Exit Programming Mode
Turn off power. The new settings will take effect at next power up.
All Purpose Train Control
User Programming
Option
Parameter 5 -
Speed Pot
Momentum
1
Fastest Response
2
Fast
3
Medium
4
Slow
5
Slowest Response
Factory settings
The number of LED flashes indicates the
Option Number for the Parameter selected
by the DIP switch.
Option
Parameter 0 -
Accel/Decel
Rate
1
Fastest
2
Fast
3
Medium
4
Slow
5
Slowest
Option
Parameter 1 -
Station Stop
Time
1
5 Secs
2
10 Secs
3
15 Secs
4
20 Secs
Option
Parameter 3 -
Run Mode
1
1 Min Time Out
2
2 Mins Time Out
3
5 Mins Time Out
4
10 Mins Time Out
5
Continuous Running
6
One Lap & Stop
(At least one Reed Switch Re-
quired)
Option
Parameter 4 -
Auto Start
Interval Timer
1
Disabled
2
15 Mins
3
20 Mins
4
30 Mins
5
60 Mins
Option
Parameter 2 -
Station Stop
Percentage
1
100%
2
75%
3
50%
4
25%
5
0% - Disabled
6
Back ‘n Forth Trolley Mode
(Two Reed switches Required)
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON