Important Installer Notes
●
When installing the aerial antenna cable please ensure that the cable leaves the back
box by the shortest route possible and is not coiled up left inside the intercom.
●
Do not stick the aerial to any metal surface. This will degrade the signal strength
received.
●
Only use 12 volts DC power supply that is supplied in the kit.
●
Please remove voicemail function from the simcard before installing into the intercom.
Major UK network voicemail removal codes are shown on page 4.
●
Prior to commissioning, please ensure that the signal strength is sufficient by sending the
text
#
SIGNAL
#
we recommend that you need a score of at least 10 - try both 2G and 4G via
dipswitch 3
●
If you do not receive a good signal strength, please reposition the aerial antenna to
improve the signal strength or alternatively change the network provider as the signal
strength can vary between suppliers.
●
There are two volume adjustment controls
Text messages command - (please see page 8)
VR1- controls the keypad tone (please see page 2).
●
We do not recommend using the “three” network simcards as they only work on 3G only.
This means sometimes they struggle for a consistent signal as they can not fall back onto
2G like other networks.
