Page 7
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Programming Dial to Open Gate Entry (WHL List) (Caller ID)
You can open the gate direct from a mobile phone or landline by calling the simcard number.
Once you call the number the GSM Intercom will reject the call and take the command to
open the gate.
We have a caller ID function controlled by the caller ID text command. If this is set to ON only
the numbers stored in the WHL list will be accepted to open the gate. If set to OFF there is
NO caller ID security and any caller can open the gate.
The unit can store 200 WHL numbers
To turn caller ID on send a text message
#
ID
=
ON
#
To turn caller ID off send a text message
#
ID
=
OFF
#
To program a number to the caller ID (whl) list you will need to send a text message code:
#
WHL
=
NUMBER
#
To delete the number send a text message code:
#
DEL
=
NUMBER
#
Example
#
WHL
=
07713099514
#
Stores your mobile number.
#
DEL
=
07713099514
#
Delete mobile number.
If the code is accepted the unit will reply “WHL number stored” If
the code is accepted the unit will reply “WHL number deleted”
To reset all numbers you can text the code
#
RESET
=
WHL
#
This will delete all primary and divert numbers plus your dial to open (whl) numbers.
NOTE
- It will not affect keypad codes.
