Page 7
How to Programme the (SMS) Text Message
You can now change the alarm message to one of your choosing.
To change the message send the text command as follows:
#
MESS1
=
YOURMESSAGE
#
This sets your custom message for input 1
#
MESS2
=
YOURMESSAGE
#
This sets your custom message for input 2
#
MESS3
=
YOURMESSAGE
#
This sets your custom message for input 3
#
MESS4
=
YOURMESSAGE
#
This sets your custom message for input 4
The default message is INPUT ACTIVATED
Note
- your can only use a maximum of 30 characters including spaces for you customised
message.
Telephone Call Alerts
The auto dialler can be programmed to send you a telephone call after each text alarm has
been sent. You will receive approximately three ring tones. The unit will then hang up
automatically. This prevents call charges being incurred.
To set call alerts to ON please send the text command
#
CALL
=
ON
#
The unit will reply back with “call on”
To disarm call alerts please send the text command
#
CALL
=
OFF
#
If the function has been set to ON you will receive a text message and shortly after a phone call.
