background image

Page 10

I M P O R T A N T  I N S T A L L E R  N O T E S

  When installing the aerial antenna cable please ensure that the cable leaves theback box by

the shortest possible route and is not coiled up and left inside the intercom.

  Do  not  stick  the  aerial  onto  any  metal  surface.  This  will  degrade  the  signal  strength

received.

  Only  use  the  12  volts  DC  power  supply  that  is  supplied  with  the  kit.

  Please  remove  voicemail  function  from  the  simcard  before  installing  into  the

intercom.  Major  UK network  voicemail removal  codes are shown  on page  4.

  Before commissioning, please ensure the signal strength is sufficient by sending the

text 

#

SS. We recommend you need a score of at least 10, and to try both 2G and 3G

via the dipswitch 1

  If you do not receive a good signal, please reposition the aerial antenna to improve the

signal strength or alternatively change the network provider as signal strength can vary
between suppliers.

  There are two volume adjustment controls

VR1 controls voice.
VR2 controls dial tone and keypad tone (please see page 2)

  We do not recommend using “three” network simcards as they only work on 3G. This means

sometimes they struggle for a consistent signal as they cannot fall back to 2G like other
networks.

Содержание 3GINTV4-4












Отзывы: