G.S.M Activate 2GINT1 V5, Руководство пользователя

Страница: 5 / 13

Programming Intercom Call Button Entry.
On the front panel there is 1 intercom call button. Pressing the relative call button will dial the
primary followed by the divert number. To programme these numbers you will need to send a
text message code which will store the number you want to use in either the primary or divert
position.
Example -
# PRI = 1 * 07713099514 # This stores the mobile phone number as primary number for
the call button.
# DIV = 1 * 07713099514 # This stores the mobile phone number as divert number for the
call button.
To delete a stored number use location followed by star hash (see table below)
# PRI = 1 * # Deletes the primary mobile number
# DIV = 1 * # Deletes the divert mobile number
IMPORTANT - PLEASE READ
There is a maximum of 15 digits per phone number stored
If the code is accepted the unit will reply “PRI number stored” or “DIV number stored”
In the event you need to reset the Intercom you can text the unit
# RESET = FACTORY #
This will delete all primary and divert numbers plus your dial to open (whl) numbers.
IMPORTANT - PLEASE READ
It will not affect keypad codes.
www.gsm-activate.co.uk - 01273462380 - sales@gsm-activate.co.uk
Page 5