Page 5
How to programme the text/SMS message
You can now change the alarm message from “
input detected”
to one of your choice.
To change the alarm message to one of your choice please send the text command as
follows.
#
MESS
=
YOUR MESSAGE
#
The detector will reply with the text message “
number stored”
PLEASE NOTE
You can only use a maximum of 19 characters including spaces for your customised
message.
Telephone Call Alerts
The Portable PIR Alarm can be programmed to send you a telephone call after each
text alarm has been has been sent.
You will receive approximately three ring tones.
The unit will then hang up automatically. This is to prevent call charges being incurred.
To set the call alerts to ON please send the text message as follows.
#
CALL
=
ON
#
The unit will reply back with the text message “call on”
To disarm call alerts please send the text message as follows
#
CALL
=
OFF
#
If the call function has been set to ON you will receive a text message then shortly after a
phone call.
