01.06.2022
Assembly instructions | G-Flexx
G-
Rack UG & Co KG • Speckenbeker Weg 130e • D-24113 Kiel • Tel.: +49 431
648060
Fax: +49 431
64806-50
• Email: [email protected] • www.g-rack.de
21/23
Instruction RGBW Remote Controller Mi-Light FUT096
Programming the hand-held transmitter on the RGBW controller
Multiple RGBW controllers can be programmed into the 4-channel hand-held transmitter distributed across
the 4 channels (zones).
Programming:
Switch off the power supply to the controller concerned and then switch it back on again. If the controller is
not yet programmed, the LEDs light up red, otherwise, they show the color last set.
Press the ON button of the corresponding channel within 3 secs. If the LED flashes repeatedly, the controller
is coupled to the remote control.
Follow the same procedure to program additional controllers into the same channel of the remote control.
Deleting:
Set the LED to a color and switch off the power supply to the controller concerned and then switch it back on
again. Press the ON button of the corresponding channel within 3 secs. If the LED flashes repeatedly, the
controller has been deleted from the remote control.
The procedure for deleting a controller from a channel having multiple controllers is the same, except that
only the power supply to the controller concerned is interrupted.
Control
Pressing the ON button for a longer time switches the programmed light to white.
The ON button is used to switch all zones to white and synchronize them at the same time.
Every time the program key M is pressed, the following fixed color programs (scenes) are selected:
1: yellow-green-blue-violet-red color sequence
2: pulsating white LED
3: pulsating red-green-blue-white
4: color change red-green-blue-yellow-violet-turquoise-white
5: color change red-green-blue-yellow-violet-turquoise-white with brightness adjustment
6: pulsating red, followed by 3x flashing red
7: pulsating green, followed by 3x flashing green
8: pulsating blue, followed by 3x flashing blue
9: combinations of pulsating and flashing color change
Note:
Due to the various apps available, deviations in operation and individual functions are possible.
