D1033
- SIL 2 Switch / Proximity Detector Repeater Transistor Output
G.M. International ISM0043-15
4
D1033Q
+ Input Ch 3 for Proximity or
Input Ch 3 for Voltage free Contact
Terminal block connections
HAZARDOUS AREA
SAFE AREA
- Input Ch 3 for Proximity or
Input Ch 3 for Voltage free Contact
+ Input Ch 4 for Proximity or
Input Ch 4 for Voltage free Contact
- Input Ch 4 for Proximity or
Input Ch 4 for Voltage free Contact
9
10
11
12
Output Ch 1
1
Output Common Ch 1 and Ch 3
2
+ Power Supply 24 Vdc
3
- Power Supply 24 Vdc
4
Output Ch 2
5
Output Common Ch 2 and Ch 4
6
Output Ch 3
7
Output Ch 4
8
D1033D
+ Input Ch 1 for Proximity or
Input Ch 1 for Voltage free Contact
HAZARDOUS AREA
SAFE AREA
- Input Ch 1 for Proximity or
Input Ch 1 for Voltage free Contact
13
14
Output Ch 1-A
1
Output Common Ch 1-A and Ch 1-B
2
+ Power Supply 24 Vdc
3
- Power Supply 24 Vdc
4
Output Ch 2-A
5
Output Common Ch 2-A and Ch 2-B
6
Output Ch 1-B
7
Output Ch 2-B
8
+ Input Ch 1 for Proximity or
Input Ch 1 for Voltage free Contact
- Input Ch 1 for Proximity or
Input Ch 1 for Voltage free Contact
+ Input Ch 2 for Proximity
Input Ch 2 for Voltage free Contact
- Input Ch 2 for Proximity
Input Ch 2 for Voltage free Contact
13
14
15
16
+ Input Ch 2 for Proximity or
Input Ch 2 for Voltage free Contact
- Input Ch 2 for Proximity or
Input Ch 2 for Voltage free Contact
15
16
Parameters Table
In the system safety analysis, always check the Hazardous Area/Hazardous Locations devices to conform with the related system documentation, if the device is Intrinsically Safe check
its suitability for the Hazardous Area/Hazardous Locations and gas group encountered and that its maximum allowable voltage, current, power (Ui/Vmax, Ii/Imax, Pi/Pi) are not exceeded
by the safety parameters (Uo/Voc, Io/Isc, Po/Po) of the D1033 series Associated Apparatus connected to it. Also consider the maximum operating temperature of the field device, check
that added connecting cable and field device capacitance and inductance do not exceed the limits (Co/Ca, Lo/La, Lo/Ro) given in the Associated Apparatus parameters for the effective
gas group. See parameters on
enclosure side and the ones indicated in the table below:
