g-lites 600SZ, Руководство пользователя

Страница: 20 / 24

www.g-lites.com 20
MAINTENANCE
This chapter includes information on replacing parts, and cleaning the fixture.
This fixture must be serviced by qualified personnel. The information listed in
this chapter is intended to assist qualified personnel
only .
Important Information:
o
Disconnect the fixture from power before servicing.
o
Exterior surfaces can reach 200˚ C and interior surfaces can exceed 250˚
C. Allow the fixture to cool for five minutes before touching any surface.
o
Always wear hand and eye protection when servicing the fixture.
o
Do not touch the lamp with bare fingers. The oils from your skin can
damage the lamp and cause it to explode. If the lamp is accidentally
touched, clean it immediately with a soft cloth and isopropyl alcohol
((CH³)²CH0H).
o
Clean the lens and dichroic filters on a regular basis. Do not use any type
of solvent since it may damage the fixture, just use a clean cloth.
It is not recommended to use the fixture for more than 4 hours.
Continuous use will shorten the life of the lamp.
o
Clean your fixture on a regular basis. Dust, fog and smoke particles can
accumulate and cause malfunctions.
o
To clean the exterior surfaces, wipe with a soft lent-free polyester cloth or
use a small vacuum to remove any built-up dust and dirt. Do not use a
blower because it will force foreign particles into the fixture.
o
For optimal cleaning, use a mixture of 70% alcohol to 30% water for the
initial cleaning. Then clean the same parts with 100% alcohol.