For shift registers you will define its type, the number of chips, CS signal pin, and MISO pin (the pin which is
connected to Data leg on shift register).
Check hardware buttons responce
If you have done your job right and saved sets to device, the hardware buttons section will respond to your
buttons presses by lighting up in red: This will help you later in mapping hardware buttons to virtual buttons
and functions.
Timers and shifts
This menus will allow you to set up to 3 types of delay for your switches and encoders, and define the
modificators (shifts) to bind several virtual buttons to 1 hardware button and a shift. Pay attention, class, more
on that later!
Button mapping
Now its time to assign your hardware buttons to the buttons on your virtual joystick in Windows.
Virtual buttons and keyboard/mouse emulation
