6 analog or digital inputs with adjustable from 10 to 14bit resolution and independent wiring
You must only connect potentiometers with the USB cable unplugged from the device.
4096 steps of resolution. Even 1/4 of this range is still 1024 steps!
To support true 10 to 14-bit performance each analog inputs has independent set of +5v and GND terminals,
oversampling and sophisticated signal filtering. Simple potentiometer wiring for axe 1. example:
8-direction POV hat switch
Connect a hat switch or even make your own by connecting any four buttons of your choice. Diagonal
directions are made by pressing two directions together ie, UP and LEFT = NW. (the hatswitch inputs are only
accessible if using the wiring matrix. Diodes should be used if connecting other buttons in the matrix.)
UP - COLUMN 3
LEFT - COLUMN 6
DOWN - COLUMN 5
RIGHT - COLUMN 4
PUSH
- Any other button input (only columns 1 or 2 if no diodes are used)
COM
.(Ground) - ROW 6
Potentiometers 1kOhm .... 100kOhm / Linear
We recommend 10kOhm for normal use.