10 FAQS
11 Error Code
1 The display board is working but the motor doesn't work
Reason analysis
Solutions
Reason analysis
a. The brake handle is
damaged
a. Pull out the socket of the brake handle (normally open throttle
brake handle), if the motor works, then it is the failure of brake handle,
should replace the brake handle.
The brake Error
The accelerator Error
Communication Error
Over current protection
a. The battery charging
port is loose
b.The connection of the
charger plug is not well
Solutions
Reason analysis
Solutions
a. Charge the scooter for 1-2 hours according to the user manual
b. Check the power button which has got stuck or not.
a. Change a good charging port
b. Change a good changer connector
a. The battery is dead
b. The power button is
out of order
b. Firstly check the speed regulating throttle and motor's hall
switch are short circuit or not. Generally it is easier to cause the joint
short circuit after rain affected with damp, so notice the short circuit
of throttle and the motor hall switch. Otherwise there will be a
continuous damage of the replacement controller!
c. If the motor doesn't turn, please inspect the motor's hall switch and
turning handle's signal. Once the power-on, the controller shell is very
hot, generally it is short circuit of the controller internal power tube ,
should immediately cut off the power.
b. The speed regulating
throttle is damaged
c. The motor is
damaged
E1
E3
E2
E4
2 Charging doesn't work
3 Can't turn on the scooter
Battery
Motor
Charger
Features
Brake Light
Max. Charging Voltage
Charging Temperature
Nominal Capacity
Battery Management System
Input Voltage
Output Voltage
Output Current
Nominal Voltage
Max Power
Number Of Batteries
32-122°F (0-50°C)
36V
42V
280Wh
500W
Over-heating, short circuit, over-current and
over-charge protection
1
220V
42V
1.5A
LED rear light
11
