5
CHALLENGE 12
Original Instructions
—
rev.2011
—
in compliance with the paragraph 1.7.4 of the Machinery
Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Artigiani,17
–
25030 Torbiato di Adro (Bs)
–
Italia
–
Tel. + 39 030 7451154
–
Fax. + 39 030 73 56 629
The following list of safety regulations is a complementary attachment of the instruction manual
of all the plate beveling machines manufactured by G.B.C. Industrial Tools S.p.a. and it is its inte-
gral part.
G.B.C. Industrial Tools S.p.A. designs and manufactures its machines according with the safety
regulations provided by the EC (89/392 and additional) and the Italian law in force.
G.B.C Industrial Tools S.p.A. is not liable for an eventual improper use of the machines and for
their use when not in conformity with the regulations listed below and of the instructions attached
hereto.
1)
Accurately read all the following regulations and the attached instructions before starting
any operation. Ensure that the operator and the foreman using the machine have full
knowledge of all the regulations and instructions.
2)
All the setting and maintenance operations shall always be performed with the machine
unplugged from any power source.
3)
Do not get you hands close to the moving milling tool.
4)
In case of replacement of the milling tool, the afore said milling tool should be handled
carefully in order to avoid to hurt yourself with the edges.
5)
Any intervention on the control box shall be performed by qualified personnel and only
when the machine is unplugged from any power source.
6)
Especially when working on short plates, be careful where you put your hands.
7)
When the machine is working off the ground ensure it to be always
attached to a security cable.
GENERAL SAFETY REGULATIONS
GENERAL SAFETY REGULATIONS
GENERAL SAFETY REGULATIONS
