4
1)
Completely Assemble and install
machine before operating.
2)
Ask for help
from trustworthy and
qualified individual if you are not
comfortable and familiar with this
tool
3)
Mount your drill press
securely on a
workbench or other flat stable
surface.
4)
Properly install chuck
before turning
on the machine.
5)
Properly lock the drill bit or other
attachment into the chuck
before
starting the drill press.
6)
Remove the chuck key
when not
actively using it. They key can be
flung when the spindle increases
speed.
7)
Do not wear loose clothing
. It could
become tangled in the drill.
8)
Always clear the table
before
starting the machine.
9)
Operate this drill press in dry
conditions.
10)
Keep your hand away from the drill
bit.
Never touch any moving part.
11)
Do not use hands to hold
workpieces.
If it is necessary firmly
hold workpieces, awkward grips
could result in loosing control of the
workpiece or you hand slipping into
the bit.
12)
Use clamps or vise
to secure work
pieces when possible. Make sure all
clamps are security tightened to
table and work piece. The column
can be used to secure the work piece
further. If clamped properly the use
of hands will not be necessary.
13)
Allow spindle to reach full speed
before beginning project. If the
machine begins to vibrate or make
unusual sounds turn the machine off
and fix issue before continuing.
14)
Only start drill when the spindle,
chuck, and accessory are cleared of
any other objects
. Do not start drill if
the work piece is touching the drill bit.
15)
Do not drill into the worktable.
Adjust table height and drill depth
accordingly.
16)
Use
appropriate
speed
for
workpiece
material
and
drill
accessory.
Refer to instructions of
the accessory to determine speed.
17)
Do not prefer prep, layout, assembly,
or other work on the table,
particularly while the drill in on.
18)
Do not leave machine one when
unattended.
To avoid accidently
start-ups, unplug the machine.
19)
Unplug
the
machine
when
preforming maintenance
such as
oiling, cleaning, or changing drill bits.
20)
Tighten the table to the column
before start-up.
21)
Properly care for drill bits and other
accessories.
Do not use damaged
accessories to work on projects.
