FY Union FY-212H, Руководство по эксплуатации, Страница: 16 / 29

16
Print Mode
Pass Printing mode, 1
、
2
、
3
、
4
、
6
、
8
、
12
、
16Pass
XSpeed Carriage moving speed, High, Middle or Slow speed mode
YSpeed Feed speed
，
High, Middle or Slow speed mode
Qty Number of copy of every job
Horizontal mirror Print with horizontal mirror, used to print on double-face media.
Vertical mirror Image prints upside down
Smartprint Skip over white space in the picture
Edge Feather To blur the pass line
，
feather pass edge
Direction of
printing
Print to left/right (Only print to right)
Unidirection Print only in one direction
Color bar
Prevent nozzles clogging, and keep track of the nozzle status. Able to set the width of color
bar and the distance from the picture
Enable Turn on/off color bar
Distance Distance between the color bar and the picture
（
unit
：
1 dot
）
Width
There are two values
，
one is the width of single color bar, another is the
width of mixed colors bar
（
unit
：
1 dot
）
Position Set the color bar on the left/right of picture
（
unit
：
1 dot
）
Disable at
beginning/ending
The color bar appears at the same height of the image
Cleaning
Cleaning Mode Flash jetting: Fire some ink out to keep nozzle open
Flash jetting
frequency
Amount of ink is going to fire. From 1/8 to 4k(Recommended flash jetting
frequency to be 4k for 3 minutes before starting printing. Flash jetting
frequency can be 32 for SPT255-12pl printhead while printing. The new
flash jetting frequency setting will be activated after reposition
Cleaning at home Cleaning when turning on the printer
Cleaning before
printing
Cleaning before printing
Cleaning during
printing
Freq: Set the interval of cleaning (unit: number of passes)
Times: Number of times of each cleaning
Flash during cleaning: Flash jetting during cleaning
Cleaning after
printing
Perform cleaning after printing
Flash jetting at
home
Flash jetting after reposition
Media
Print Position Starting printing position
Starting The left margin of media
（
unit
：
mm
）
Width Width of media
（
unit
：
mm
）
Margin The distance from the cleaning position to the left edge of the media
（
unit
：
mm
）
Chapter 4 Basic Operation