12
I
4.2. Installation for PCI card and printer driver
● Driver Installation
a) Insert PCI card into the PCI slot of the computer, then start the computer.
Attention: T
he PCI card can’t be inserted or drawn out while the computer is
power on, otherwise the PCI card would be damaged
.
b) After WINDOWS startup
，
it will search the driver for the PCI card automatically.
The setup will search the directory named “PCICardDriver” in Driver CD.
c) Connect Optical fibers:
There are two fiber wires with label “A” or “B” which connects from the PCI card to the
printhead board; therefore, these two boards come with the connection plug for the fiber wire.
The label “Tx” and “Rx” are indicated on the connection plug on the two boards. One of the
fiber wires connects to the “Tx”, and the other one connects to “Rx”. The optical fiber should
be plugged to the interface with aiming to the gap, then lock it.
Warning: Do NOT bend the optical fiber in an angle with less than 90 degree.
Optical
Fiber Interface
High Density Data
Cable Interface
A
A
B
B
TX
RX
RX
TX
Chapter 4 Basic Operation