095
0
.
4
12
M
/
M
Page 13
4
.
OPERATION
4.1 Controls
14
15
16
17
11
12
13
10
9
8
7
6
5
1
2
3
4
1. LCD panel
2. Inductance display
3/4. Inductance adjustment
5. Time display
6/7. Time adjustment
8. Current adjustment
9. Wire feeding speed adjustment
10/11. Thickness adjustment
12. Device information
13. Pulse welding
14. Aluminium
15. Iron
16. Copper
17. Alloy
1. Current display
2. Material thickness
3. Wire feeding speed
4. Pulse welding
5. Regular
Setting Instructions
1
2
3
4
5
1
.
Operation Panel
N O . 1 3
(
1). LCD panel
(
2) .Inductance display
(
3)/(4) .Inductance adjustment
(Default setting, do not adjust
unless necessary. Remember that
the higher the inductance, the
deeper the fusion.)
(
5) .Time display
(
6)/(7) .Time adjustment
(
8). Current adjustment
(
9) .Wire feeding speed adjustment
(
10)/(11) .Thickness adjustment
(
12) .Equipment information
(
13). Pulse / Regular
(
14) .Welding materials
Attention!
1
.
Generally only need to adjust (10) and (11). Do not need adjust other preset parameters.
2
.
According to actual situations, sometimes can fine tune (8) and (9) to achieve the best welding effect.
3
.
Restore factory default settings
：
Press (12), LCD panel (1) shows equipment information. Then press and hold (3) and (6) at the same time for
about 10s. Turn off the machine then turn it on.
4
.
Regular and pulse switching: The machine is preset as regular mode as
⑤
in the figure. Press (13) to switch
the mode to pulse welding indicated by a highlighted black box over the program icon as
④
in the figure. Then
(9) is used to adjust the pulse frequency instead of wire feeding speed. Press (13) again, switch to regular
welding mode again.
5.Spot welding time adjustment: The defualt setting is FFF -- manual mode. It will switch to aoto mode if adjust
(6) and (7). For example spot welding time 0.1 means 0.1s, which means that when you press and release the
trigger once, the machine will stop after feeding wire 0.1s (welding only 0.1s even if you press and hold the
trigger all the time).
2
.
Setting Screen
095
0
.
4
12
M
/
M
(1)
(2)
(3)
(4)
(11)
(12)
(13)
(10)
(9)
(8)
(7)
(6)
(5)
Welding materials(14)
①.
Current display
②.
Material thickness
③.
Wire feeding speed
④.
Pulse welding
⑤.
Regular welding (it is regular
welding as shown in the figure)
①
②
③
④
⑤
Operation
