INSTALL NOTE:
A-CT4
LANDSCAPE & ARCHITECTURAL LIGHTING
| Learn more. Visit fxl.com
3. Product Installation
1. Secure the driver housing in-ground in
accordance with local codes and regulations.
2. Connect conduit or cable runs to the bottom of
the driver housing with couplings (1/2"-14 NPT,
provided by others). Use the provided ½"-14
NPT plug for unused conduit openings.
3. Add the installation cover onto the driver
housing with the provided fasteners to prevent
dirt and debris from entering the driver housing.
4. To complete the installation, attach the fixture
to the driver housing faceplate. Connect the
driver wiring (provided with the fixture) to the
fixture using the wiring diagram and approved
wire connectors.
5. Use double-sided tape and a zip tie to secure
the driver to the driver mounting tab.
6. Tighten the 8-32 x ½" (13 mm) setscrew using
a 5/64" Allen key to lock the rotational position of
the fixture to the driver housing faceplate.
7. Seal the driver housing compartment using the
provided gasket and fasteners (10-24 x ½" (13
mm) screw) with a 1/8" Allen key.
Driver Housing
Driver Housing Faceplate
Diagrams
Driver Mounting Tab
Driver
