FXA 502231653, Инструкция по эксплуатации

Страница: 12 / 80

12
Always keep the dust extraction holes in the vibrating
plate free of dirt or other obstructions.
LUBRICATION
All of the bearings in this tool are lubricated with a
sufficient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore,
no further lubrication is required.
CLEANING THE SANDING SHEET
The sanding sheet that came with your sander is made
to be re-used. Therefore, it is important that they be
cleaned periodically to remove sanding residue and
foreign material that can accumulate over time.
To clean sanding sheets, rub the sheets with a hard
rubber block. You can also use the clean rubber sole of
a shoe.
WARNING! Always remove scrubbing or sanding pad
from sander before cleaning. Failure to do so could
cause serious personal injury.
TECHNICAL SPECIFICATION
Voltage 18V DC
Oscillations 11000 opm
Pad size 140 x 140 x 93mm
Eccentric diameter 1.6mm
Sound Pressure Level L
pA
69.6 dB(A)
K=3dB(A)
Sound Power Level L
WA
80.6 dB(A)
K=3dB(A)
Vibration Level 7.34 m/s 2 ,
K=1.5m/s 2