FLATLINE VAN CO • [email protected] • 888-667-5576
3.
NEXT, SLIDE THE TWO (2) RAIL NUTS INTO THE ROOF RAIL ON YOUR VAN.
NOTE-
IF YOU’VE ALREADY INSTALLED A ROOF RACK, THIS MAY BE
TIME
CONSUMING.
4.
NOW POSITION THE LADDER ON THE VAN, HANGING IT ON THE ROOF RAIL.
LOOSELY SCREW THE TOP OF THE LADDER DOWN TO THE ROOF RAIL USING
THE 3/8-16 X .75” SCREWS AND THE 3/8 BELLEVILLE LOCK WASHERS JUST
ENOUGH THAT IT IS SNUG (SEE
FIGURE 3
)
NOTE-
WE LIKE TO PLACE THE LADDER AS CLOSE TO THE REAR
WHEEL WELL AS WE CAN. SEE IMAGE BELOW.
NOTE (2)-
IF YOU’RE INSTALLING THE LADDER IN CONJUNCTION WITH
OUR
LOW PRO ROOF RACK
FOR
144 HIGH ROOF SPRINTER
,
PLACE THE SUPPLIED SPACER BLOCK UNDER THE RIGHT
HAND LADDER MOUNT AS SHOWN IN
FIGURE 4
TO THE
LOWER RIGHT. THE LEFT HAND MOUNT WILL LAND ON TOP
OF THE CENTER FEET OF YOUR LOW PRO, REMOVE THE BOLT
GOING THROUGH YOUR LOW PRO FOOT AND REINSTALL IT
THROUGH THE LADDER MOUNT AND BACK THROUGH THE
LOW
PRO
FOOT.
5
RAIL NUT
FIGURE 3
FIGURE 4
