FLATLINE VAN CO • [email protected] • 888-667-5576
LET’S GET STARTED!
1.
PLACE THE LADDER HALVES FRONT SIDE DOWN, INSERT THE COUPLERS
INTO ONE HALF (SEE
FIGURE 1
), AND TIGHTEN DOWN USING THE 1/4-20
SCREWS.
2.
SLIDE THE OTHER LADDER HALF ONTO THE COUPLERS AND TIGHTEN DOWN.
NOTE-
IF DESIRED YOU CAN USE BLUE LOCTITE ON THE SCREWS.
4
FIGURE 1
FIGURE 2
