FLATLINE VAN CO • [email protected] • 888-667-5576
8.
THIS STEP IS ONLY NECESSARY IF YOU ARE MOUNTING A FIAMMA F45 (OR
SIMILAR) AWNING TO YOUR SAFARI RACK. IF YOU ARE NOT MOUNTING AN
AWNING, SKIP TO STEP 8.
YOU WILL MOUNT THE 3
AWNING BRACKETS
TO THE UNDERSIDE OF THE
PASSENGER SIDE OF THE RACK AS SHOWN IN
DETAIL F
TO THE RIGHT. THE
LOCATIONS ARE SHOWN BELOW IN
FIGURE 5
AND USE THE SAME
REFERENCE POINT AS THE CROSSBARS. THESE BRACKETS SHOULD BE
TIGHTENED ONCE ATTACHED TO THE RACK USING THE SAME HARDWARE SET
AS THE RAIL MOUNTS.
NOTE-
THE DIMENSIONS GIVEN ARE SUGGESTED BASED ON OPTIMAL
SUPPORT LOCATIONS. THESE MAY DIFFER IF USING A SMALLER OR
LARGER AWNING THAN TYPICAL, AND ADDITIONAL MOUNT SLOTS
ARE AVAILABLE TO SUIT YOUR NEEDS.
THE AWNING BRACKETS HAVE SLOTS FOR MINOR ADJUSTMENT.
11
AWNING MOUNTS
DETAIL F
AWNING BRACKET
FIGURE 5
FRONT
BACK
REFERENCE POINT
0
23
1 2
"
81
1 2
"
159
1 2
"
