FLATLINE VAN CO • [email protected] • 888-667-5576
6
2.
NEXT, GRAB YOUR FIRST BRACKET AND SET IT ON THE LEDGE. YOU WANT TO
ENSURE THE BRACKET FACE RESTS FLUSH WITH THE WALL STRUCTURE.
LINE IT UP WITH YOUR FIRST MARK AT
4.5”
AS SHOWN IN
FIGURE 4
AND
DRIVE IN THE FIRST
1/4 SELF DRILLING SCREW
.
NOTE-
FOR SOME INSTALLATIONS IT IS EASIER TO MARK YOUR HOLE
LOCATIONS AND DRILL AN 1/8” PILOT HOLE BEFORE DRIVING THE
SELF DRILLING SCREWS.
FIGURE 3
FIGURE 4
ALIGN BACK SIDE OF BRACKET
CHANNEL WITH YOUR MARK
