FLATLINE VAN CO • [email protected] • 888-667-5576
LET’S GET STARTED!
1.
FIRST STEP IS TO MEASURE AND MARK THE LOCATIONS FOR OUR BRACKETS
TO GO INSIDE THE VAN. YOU WANT TO MEASURE FROM THE REAR EDGE OF
THE SHEET METAL ON THE WALL AS SHOWN IN
FIGURE 1
. PLACE A MARK ON
THE “WINDOW LEDGE” AT
4.5”
AND
54.5”
NOTE-
THE MOST IMPORTANT MEASUREMENT WILL BE YOUR
CENTERLINE MEASUREMENT OF THE BRACKETS ONCE INSTALLED.
THEY SHOULD MEASURE 50” CENTER TO CENTER.
5
FIGURE 1
FIGURE 2
REAR OF VAN
