FLATLINE VAN CO • [email protected] • 888-667-5576
LET’S GET STARTED!
1.
FIRST STEP IS TO GET THE BED RAILS UP. HAVING A SECOND SET OF HANDS
MAKES THIS MUCH EASIER. POSITION THEM WHERE YOU WANT THEM, THEN
PLACE THE L-TRACK ANCHORS IN POSITION IN YOUR ADWAG KIT TO RECIEVE
THE RAILS.
NOTE-
THE BED HAS A VAST RANGE OF HEIGHT ADJUSTMENT,
WE RECOMMEND MOUNTING IT BETWEEN 25”-41” HIGH WHEN
MEASURED FROM THE FLOOR OF THE VAN.
2.
NEXT, TIGHTEN DOWN THE NUTS FOR THE STUDS.
4
MEASURE TO THIS EDGE
