FuzzDog FuzzPup Rodent, Руководство пользователя

Страница: 6 / 10

Assembly #1
This is where the *fun* starts. As this PCB is slightly different to our normal
FuzzPup range in not having jack connections and being a bit wider, you need to
take a little more care with assembly.
Get your hardware in place in the enclosure and wire it up, leaving plenty of slack
where it’ll join the daughterboard. Once you start soldering that it can get very
awkward if your wires are too short.
Run the wires under the jacks. You don’t want them getting in the way when you
place the main PCB.