FuzzDog FuzzPup Rodent, Руководство пользователя

Страница: 5 / 10

Wire up your pots
If you’re using the pot daughterboard you need to allow some slack in the wires
attaching it to the main PCB. About an inch is a good length. We recommend
wiring on the top side of the main PCB rather than underneath as it’s easier to
guide the wires on final assembly, and they’re less likely to get snagged up under
the boards.
If you have the means to strip ribbon cable
this can make a really neat finish rather
than individual wires.
The following pages show the FuzzPup BigFluff
being assembled. The process is identical .