FUYU AMC4030 Скачать руководство пользователя страница 5

User Manual of AMC4030 Motion Controller 

 

 

AMC4030 controller can be connected with PC through a USB cable to build a hierarchical 

online motion control sytem. It can also be separated from PC, and build a a stand-alone control 

system through the HMI human interaction. 

  When the AMC4030 is used as an online motion system, the user can edit various motion 

control commands through the PC-based software provided by us and realize real-time 

monitoring of the control system. The motion controller completes all the motion trajectory 

control and the response of the control commands, as well as the detection and response of all 

IO signals.

 

When AMC4030 is used as a independent control system, a separate HMI (such as a touch 

screen)is needed.   

The motion data is pre-solidified to the control card,then the HMI commands, processing 

data and all the IO signal detection and response will be executed and completed via the HMI and 

the motion control.

 

 

Chapter 2 Instructions for Quick Use 

 

2.1 Open-package Inspection 

After unpacking, please carefully check if the product model is consistent with your order. If the 

product surface is damaged or product model is wrong, or accessories are missing, please do not 

use, and immediately contact the dealer. Standard configurations are as follows:

 

Содержание AMC4030










Отзывы: