Original User Manual FUXTEC FX-EB152/FX-EB162_de_en_fr_rev15
50
2. Difficulties during operation
Situation
Cause
Solution
The engine does
not reach the
speed
Choke is in "COLD START" position, the
exhaust system is blocked no air supply,
moving elements worn, ignition spark
weak too large valve clearance, cylinder
head sooty
Open choke, replace exhaust system
Check or replace ignition coil, adjust
flywheel, spark plug
Operating
materials are
leaking
Lines to carburetor blocked Spark plug
spacing incorrect
Replace the lines and carburetors,
adjust gap dimension
Engine-
Noises
Wrong choke position,
Camshaft damaged
Check/replace camshaft
Carburetor
leaking
Failure of the check valve on the tank cap
Replace the fuel filler cap
Carburetor gasket is worn out
Replace carburetor or gasket
If no troubleshooting solves the problem, please contact FUXTEC. Only use
original parts approved by FUXTEC. Otherwise, there is a risk of danger.
33.
Customer Service
Have your purchased device repaired only by qualified personnel and only with original spare parts.
This will ensure that the safety of the device is maintained.
34.
Warranty
The warranty period is 24 months from the date of purchase. Please keep your proof of purchase
in a safe place. Excluded from the warranty are wearing parts and damage caused by improper
use, use of force, technical modifications, use of incorrect accessories or non-original spare parts,
and repair attempts by non-qualified personnel. Warranty repairs may only be carried out by
authorized specialist dealers.
