Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20
16
- Saw off longer branches piece by piece.
- When delimbing lying logs, always saw off the branches protruding freely into the air first. Do not
cut off support branches until the log has been sawn in lengths.
- Attention Risk of injury!
Branches that are resting or under tension can wedge the saw-chain in the
wood.
Maintenance and care
Caution: before carrying out any work on the power tool, remove the cordless high hedge trimmer
from the device.
Sharp cutting teeth
Wear protective gloves!
Do not use water or liquid detergents.
- Clean the pole saw after each use with a dry cloth or with a brush in case of heavy contamination.
- Never spray the device with water.
- Keep the contacts of the battery and device clean and dust-free.
- Remove the chain cover and then use a soft brush to remove debris from the guide bar, saw chain,
sprocket, and chain cover.
- The saw-chain must not sag but should be in the middle of the saw-bar
Remove 2-3 millimeters from the saw-bar.
Disposal
WARNING!
Make used power tools unusable before disposal:
mains-operated power tools by removing the connecting plug,
cordless power tools by removing the battery.
For EU countries only
Do not throw power tools in household waste! According to the European Directive 2012/19/EC on
waste electrical and electronic equipment and its implementation in national law, used electrical
equipment must be collected separately and sent for environmentally sound recycling.
