Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20
15
Switching the device on/off
Insert the battery into the rail provided. Then push in the safety button (Figure 6, item 1) on the side,
only then you can operate the on/off switch (Figure 6, item 2). The device now turns on. If you
release the on/off switch, the device stops working. Attention: Cutting tools can still run on
minimally.
Working Instructions
- Search the work area and remove any disturbing objects.
- Check the safety of the device before starting work.
- Take the device in both hands.
- Switch on the pole saw before you begin cutting.
- Apply even pressure to the device, but not excessive force.
- Attention Risk of injury! Only use the pole saw up to a maximum angle of 60°. Never cut a branch
directly above your head!
- Start at the bottom of the log and work upwards.
- For a clean-cut, thick branches should be sawn in 2 steps:
Saw in the branch from base to top to 1/3 of the branch diameter (see right figure point 1.).
Saw through the branch a little further out from top to bottom (see right illustration point
2.).
