FUXTEC FX-DH116, Оригинальное руководство пользователя

Страница: 12 / 16

Original User Manual FUXTEC FX-DH116_rev02
12
Do not carry out any electrical repairs yourself. Contact a specialist. Do not use a
defective device. When cleaning, make sure that no water gets into the housing. Do not
open the housing to access the internal parts. Do not spray water into the heater.
Do not use solvents, gasoline, toluene, or similar aggressive chemicals to clean the
heater.
Ignition electrodes:
Clean, adjust, and, if necessary, replace the ignition electrode. For electrode gaps,
dimensions in MM.
Compressor pressure setting:
The compressor is delivered ex-works and may only be checked and adjusted by
qualified personnel. Interventions in the device can be dangerous.
Remove the cap. If necessary, adjust the pressure to the correct value, turn the screw
clockwise for pressure increase, counterclockwise for the decrease. Air pressure should
be (bar) 0.31.
Electrically:
Check cables, electrical parts, and connections regularly.
Circuit diagram: